Products
PRO-NDC-1E2K NMEA 0183 Multiplexer / NMEA 2000 Gateway
Rugged, Robust, Type Approved Multiplexer with built-in NMEA 2000 connectivity, high-speed Ethernet streaming of data and flexible configuration.
Quick and easy to install.
Configuration using standard web browser, no PC operating system compatibility issues.
Advanced features solve NMEA 0183 data routing problems.
Fully isolated with ISO-Drive technology for peace of mind.
Easy firmware updates make the device future-proof.
Type Approved (RINA).
WGX-1 NMEA 2000 to Wi-Fi Gateway
The WGX-1 is an intelligent NMEA 2000 WiFi Gateway with bi-directional conversion capability.
Transfer data from an NMEA 2000 backbone to any device (e.g laptop, tablet or smartphone) connected to the WGX-1 via Wi-Fi and additionally convert data bi-directionally between NMEA 0183 and NMEA 2000 using Actisense’s renowned conversion engine. The WGX also acts as a wired gateway, allowing for transfer or conversion of data between existing NMEA 0183/NMEA2000 instruments. Actisense-i suite of diagnostic tools and health checker for your network included. NMEA 2000 data logging ability.
NGX-1 NMEA 2000 Dual Gateway
Intelligent Gateway technology enables PC interfacing and NMEA data conversion
The NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and NGW-1) into one, cost-effective, flexible product.
Configure the NGX-1 to operate as an NMEA 2000 <–> PC interface, or as a bi-directional NMEA 0183 <–> NMEA 2000 conversion gateway.
PRO-NDC-1E NMEA 0183 Intelligent Multiplexer
Rugged, Robust, Type Approved Multiplexer with powerful, advanced features enable baud rate adjustments, auto-switching and sentence level filtering.
Quick and easy to install.
Configuration using standard web browser, no PC operating system compatibility issues.
Advanced features solve NMEA 0183 data routing problems.
Fully isolated with ISO-Drive technology for peace of mind.
Easy firmware updates make the device future-proof.
Type Approved (RINA).
PRO-MUX-2 NMEA 0183 Intelligent Multiplexer
Eight OPTO-isolated inputs and six ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.
The PRO-MUX-2 is rugged, with a stainless steel housing, and provides isolation on all inputs and outputs. With eight NMEA 0183 inputs, six NMEA 0183 outputs, a bi-directional serial port and an Ethernet port, the PRO-MUX-2 is a perfect solution for larger leisure vessels, commercial shipping and is a great addition for systems that require type-approved devices.
The PRO-MUX-2 is designed to suit the majority of NMEA 0183 systems, from leisure through to class vessels.
PRO-BUF-2 NMEA 0183 Intelligent Buffer
Two OPTO-isolated inputs and twelve ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.
The PRO-BUF-2 is rugged, with a stainless steel housing, and provides isolation on all inputs and outputs. With two NMEA 0183 inputs, twelve NMEA 0183 outputs, a bi-directional serial port and an Ethernet port, the PRO-BUF-2 is a perfect solution for larger leisure vessels, commercial shipping and is a great addition for systems that require type-approved devices.
The PRO-BUF-2 is designed to suit the majority of NMEA 0183 systems and ready to go ‘out of the box.’
PRO-NBF-1 NMEA 0183 Buffer
Safely connect one Talker to six Listeners with full isolation.
The Type approved NMEA Buffer PRO-NBF-1 Buffer isolates and buffers NMEA 0183 data, with the power to drive multiple devices.
Able to distribute up to six identical, amplified streams of data from one source the NMEA signals are buffered to ensure that each Listener receives the data at the required voltage levels, providing consistent data quality.
Isolation on the input and outputs ensures the protection of the source Talker device and Listener devices.
QNB-1 Quick Network Block
Fault-free, NMEA 2000 backbone connections.
The QNB-1 and QNB-1-PMW provide alternatives to multiple connectors, reducing the cost of an NMEA 2000 cable installation. Perfectly suited to areas of high instrument density, as six drops can be connected.
W2K-1 NMEA 2000® to Wi-Fi Gateway
Data logger and Actisense-i diagnostic tools
Transfer data from an NMEA 2000 backbone to any device (e.g laptop, tablet or smartphone) connected to the W2K-1 via Wi-Fi and additionally convert this data to NMEA 0183 using Actisense’s renowned conversion engine. Actisense-i is a suite of diagnostic tools and health checker for your network.
The W2K-1 has built-in conversion of NMEA 2000 messages into NMEA 0183 sentences thus allowing a wide variety of vessel data to be shared with NMEA 0183 compatible software applications running on connected devices.
EMU-1 Engine Monitoring Unit
Share engine information on the NMEA 2000 bus.
The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitises analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.
The EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.
DST-2 Digital depth, speed & temperature transducer interface
Breathe new digital life into transducers, with digital signal processing technology.
The DST-2 digitises depth, speed and temperature transducer signals into NMEA 0183 data to deliver best-in-class seabed tracking.
It works with NMEA 0183 compatible devices, such as chart plotters, radars or an on-board PC. In addition, it can be calibrated via a PC to match various sensors and installations.
Using a DST with an existing depth transducer can be much more cost-effective than having to lift the boat out of the water to change the transducer skin fitting. Not only does this save mo
OPTO-4 Serial Opto Isolator
Add isolation to an RS232 port to protect against ground loops.
The OPTO-4 provides comprehensive galvanic OPTO-isolation to protect the PC input/receiver, plus important spike suppression to improve the PC output/transmitter protection. Initially designed for systems wishing to receive NMEA 0183 data without the risk of ground loop damage, the flexible OPTO-4 can be used to interface any RS422 and standard RS232 connection, whilst powering itself from the RS232 port, making installation simple and very quick.
USG-2 USB to Serial Gateway
The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network.
The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.
It provides a far safer connection when compared to standard USB to serial converters.
Electrical isolation is provided by the ISO-Drive™ output and OPTO-isolated input making installation simple and free from ground loops.
The input uses the Actisense OPTO-isolation circuitry to protect any connected equipment from the most common system faults.
A2K range of NMEA 2000 cables and connectors
The Actisense A2K range is designed to the highest quality, providing you with a robust and reliable NMEA 2000® network that you can rely on.
A2K range of cables and connectors from T-Pieces, terminators, cabling, bulk reel, and more.