Products
E-VANG
ELECTRIC BOOM VANG
Patent Pending ground breaking eco-friendly electric boom vang, to replace hydraulic vangs in all their functions.
Eco friendly: no oil on board, but a very high energy saving equipment;
Easy installation: no hoses and manual or hydraulic control units, you just connect to the 12/24/48V on-board power supply;
Easy use: controlled by 3 switches (Up – Down – Emergency Quick Release high speed);
GFM
MANUAL FORESAIL FURLER
Manual foresail furler, available in different sizes C0, C0T, C1, C2, C3, C4, C5 and C6 (for either 1x19 Wire stays from Ø 4 to Ø 26 mm, or Rod from #10 to #91). The kit is supplied complete with aluminum furling foils and halyardswivel. It is equipped with link plates which may be cut to measure in order to customize tack height. It has been conceived in order to be easily fitted by means of simple tools.
FT FURLER
FLAT TACK FORESAIL FURLER
A new range of manual foresail furlers is born. It is characterized by a low tack fitting above deck. As in the the GFM Crociera series, the operating mechanism works with free Delrin (Ø 10 mm) ball bearing races running on races machined from solid hardcote anodized aluminium.
This new line of drums is to be matched with the classic set of Bamar BMG 30 -40 -50R furling foils. Extreme operational ease, light weight, reduced overall dimensions and very low maintenance.
GFI
HYDRAULIC FORESAIL FURLER
Bamar “GFI” series: hydraulic systems to furl and reef sails. A combination of innovative technology and experience gained while working with prestigious boat yards.
These furlers offer and grant high performances and long duration, since they are designed and manufactured from high quality materials by means of CNC machines.
Mechanisms that require very low maintenance, with vanguard transmission systems.
EJF
ELECTRIC FORESAIL FURLER
EJF has been developed combining technology and design.
The evolution of technology in the sailing world grows more and more towards semiautomatic mechanisms which satisfy the demand for performance, reliability and quality.
Bamar presents this new line of electric foresail Furlers that guarantee unique specifications, increased torque force, easy installation, low maintenance, thus improving comfort and safety onboard.
SUNNY
MANUAL FURLERS FOR REMOVABLE SHADES
Bamar Sunny is a new product born from the experience acquired in the marine industry and developed for the civil sector to be used to furl removable / roll-up shades.
Sunny consists of a manual drum and a halyard swivel.
The system is designed to be matched and completed with a NO TORSION stay and awning / shade. Such stay transmits the torque exerted by the drum. You manually control the endless line to furl the drum, which allows the “sail” shade to be rolled up.
GFS
"FLUSH-DECK" MANUAL FORESAIL FURLERS FOR FIXED STAYS
The GFSI- GFSE series has been completely upgraded combining new technology and experience deriving from the previous series in production since 2003. These motorized furlers with self-aligning spherical fulcrum, designed for a structural flush-deck installation, may also be equipped with an integrated real time stay tensioning cylinder, tack adjustment kit (Cunningham) and fitting for tie-rod connection (on non-structural decks).
GFSI CTS
"FLUSH-DECK" HYDRAULIC FORESAIL FURLER FOR TORSIONAL STAYS
The new GFSI CTS series represents the natural evolution of the standard “flush deck” GFSI furlers, which only involved the use of non-torsional structural stays with carbon or aluminum furling foils.
It has been designed to be used with structural torsional stays, which the sail is directly furled on. Therefore, this solution allows a reduction in weight. The stay can be tensioned in real time thanks to the integrated hydraulic cylinder.
SIT & SET
"FLUSH-DECK" HYDRAULIC OR ELECTRIC FURLER WITH CYLINDER FOR REMOVABLE STAYS
Furling units with self-aligning spherical fulcrum, designed for a “structural” flush-deck installation, are also available with integrated stay tensioning cylinder for the removable stay
They may be manufactured with either direct motor “D” in line with the stay, or with motor parallel to the stay “P” to keep even smaller overall dimensions.
RLG EVO
FURLING SYSTEM FOR GENNAKERS
New furling system for Gennakers (sails with free flying luff ), an evolution of the well-known and patented ROLLGEN system. This new development is characterized by both higher performances in terms of working load and smoothness in movement, and weight decrease by roughly 60%. Such characteristics have been obtained thanks to the use of materials such as Ergal aluminium alloy and 17-4PH steel.
ROLLGEN STAY KIT
SPECIAL STAY FOR RLG EVO
RollGen is the special patented stay that may furl Gennakers and less specifically all sails with free flying luff.
The stay is made of a special anti-torsion stay that may transmit the furling torque to the sail head. It is covered by a special EPDM gaiter that absorbs compression stress that would weigh down upon the sail cloth. Furthermore, the gaiter allows for the sail to furl on a bigger diameter compared to the naked stay.
RLG EVO S
FURLING SYSTEM FOR STRUCTURAL STAYS
New furling system for structural stays, evolution of the wide known and patented ROLLGEN system.This latest innovation is characterized by a line stowing drum to be used in combination with NO TORSION stays.
Light-weight and functional: these characteristics are obtained thanks to the use of materials such as Ergal and 17-4PH steel.
It is manufactured from aluminum blocks thanks to the use of CNC machines and makes use of high load bearings in order to allow for the parts to slide perfectly.
BWS
ELECTRIC / HYDRAULIC FURLER FOR BOWSPRIT
The BWS electric or hydraulic furler has been designed in order to have the smallest overall dimensions possible and allow for an easy installation on any bowsprit. It is to be used on sailing yachts looking for performance with the sail positioned on the extreme bow. Its high speed and sail furling torque make the furling operation easier and faster. Though the system was originally intended to be used on a bowsprit, it may be easily fitted below deck.
PE
ELECTRIC FURLING PAD EYE
Bamar presents this new line of electric Code Furlers that guarantee unique specifications, such as reduced weight, easy installation, low maintenance, reduced overall dimensions, thus improving comfort and safety onboard. Body and fork parts are made in 316 stainless steel in order to ensure the best resistance to marine conditions. Parts that are exposed on deck are mirror polished.
PI
HYDRAULIC FURLING PAD EYE
Bamar presents this new line of hydraulic Code Furlers that guarantee unique specifications, such as reduced weight, easy installation, low maintenance, reduced overall dimensions, thus improving comfort and safety onboard. Body and fork parts are made in 316 stainless steel in order to ensure the best resistance to marine conditions. Parts that are exposed on deck are mirror polished.
RLG-CODE GFI
HYDRAULIC FURLER
RLG-CODE furlers are also available in the hydraulic motorized version GFI. The system is to be fitted either on a chain-plate on deck, or on a bowsprit. The system is available in two different configurations:
“RollGen”, with the special stay; it allows you furl all common types of free flying asymmetric sails of standard construction.
“CODE” version (stay not supplied), instead, may be used to furl sails, such as Code Os, Drifters, etc., with luff integral to the stay.
HYDRAULIC CYLINDER
Bamar standard cylinders are manufactured with high quality materials. Rods are made from polished stainless steel type AISI 316. Tube, fork and cap are all machined from hardcote anodized aluminium. Upon demand we may supply special lengths and custom cylinders for any application.
Cylinders are single acting and are equipped with a pressure rod release. This pressure is charged through the “pneumatic” valve located on the cylinder body, opposite to the rod.
HYDRAULIC BOOM VANG
Vang cylinders are equipped with a pressure rod release. Inert gas pressure is charged through a “pneumatic” valve located on the cylinder body, near to the boom-side vang terminal.
The system is equipped with a mechanical valve to exclude the gas-loading pin and grant pressure holds in time.
BHP
SINGLE FUNCTION OR MULTIFUNCTION HYDRAULIC PANEL
Bamar Hydraulic Panel is a hand pump supplied with gauge, release valve and 4-function selector knob (only for multi-function devices), for easy and quick control of cylinders on board.
A 4-position selector that allows for a quick and safe use even in worst conditions characterizes function selection
The system is provided with a pressure gauge, which makes pressure reading easy and fast.